Intellinet 3-Port Print Server User Manual download pdf (Page 107)

101

8.4.2 TCP/IP

You can configure the print server to automatically get

IP from DHCP server or manually specify static IP. The

print server also has a built-in DHCP server. You can

enable this DHCP server and let it manages IP for you.

If you need the print server to automatically get an IP

from DHCP server, select “Enable Obtain TCP/IP Settings

Automatically (Use DHCP/ BOOTP)”. You also can select

“Disable Use the following TCP/IP Settings” to manually

assign “IP Address”, “Subnet Mask” and “Gateway” for the

print server.

You can enable/disable the print server’s DHCP server.

The DHCP server is disabled by default. If the DHCP

Server is enabled, you have to assign a range of IP

addresses here. Fill in the “Start IP”, “Range”, “Gateway”,

1 2 ... 102 103 104 105 106 107 108 109 110 111 112 ... 152 153

No comments

Intellinet 3-Port Print Server User Manual Page 107