Intellinet 524049 User Manual

DUAL WAN VPN ROUTER USERMANUAL MODEL 524049 INT-524049-UM-0208-02

Connect: Click to refresh and re-connect to the Internet.8. Click “Save” to save the current conguration. NOTE: If the settings aren’t saved at th

Allow private IP to be accepted: Select to allow a WAN port to be assigned a private IP address.5. A screen displays presenting “Conn (Connec

NOTE: You can also click “Show Internet Information” in the previous Connection window. Connection Type: This should display “Cable Modem (DHCP).”

2. On the Basic Setup tab, click WAN(1 or 2) Setup.3. Enter the WAN IP address, subnet mask, default gateway, primary DNS server and secondary DNS

“Disconnect” to release the current WAN port IP address, then click “Connect” to refresh it. “Connect” and “Disconnect” buttons will also be shown pre

DHCP IP Pool can be changed here. Manual DNS conguration, when selected, lets you enter a manual DNS server. The DHCP server will assign a spec

Report an event LOG regularly at assigned times; report a event LOG when a new event is detected; and clear all events after a report.Click “Refr

Link Information: This panel displays the link status router as determined above. Link Statistics: This panel displays the trafc statistics of WAN an

SystemAdministrator SetupThe two panels on this screen allow basic administrator changes to be made. Login Account Setup: The login user ID and passwo

Firmware UpgradeFirmware Upgrade: The update/upgrade rmware for the system: 1. Obtain a rmware le from the customer support Web site and save it t

Access ListAccess List: On this screen, you can congure the IP address of computers that are allowed to access the router’s Web management. Statu

Misc.Hostname Setup: This is what is displayed on the title bar of Internet browser and on the subject line of e-mail reports. 21ROUTER SETUP/INSTALLA

Cong Mgmt/Restart: Cong Backup downloads the conguration le to your PC. Cong Restore allows you to reload the previously saved conguration.

Application QoSSetup by Application: By setting the QoS by application, the upload and download speed of a specied application can be limited to spec

Port QoSSetup by Port: By setting the QoS by application port, the upload and download speed of a specied application can be limited to specied maxi

Protocol is the TCP/UDP type for the packet that you want to diversify within Internet trafc. Source Port is the source protocol port number for

Application Setup: The applications listed above will work correctly when the IP address is specied. FTP Private Port: This is used for FTP acc

DMZ Host Setup: Trafc transmitted on a WAN through an undened application port will be forwarded to a specied DMZ host. The host specied as “DMZ

Port TriggerPort Trigger Setup: This monitors the online connection of an application as a trigger condition and automatically registers the port fo

NAT On/OffNAT On/Off Setup: Select “NAT Off” to disable the NAT (Network Address Translation) function. NOTE: In NAT Off mode, all other features th

INTRODUCTION Thank you for purchasing the INTELLINET NETWORK SOLUTIONS™ Dual WAN VPN Router, Model 524049.This versatile device combines a load-balanc

Connection Filtering: This function will block or accept the specifed internal and external PCs. Direction presents two options: • “LAN -> WAN

WOL PC Registration: PC Name lets you enter recognizable names to distinguish among various PCs. Physical Address presents two options: • “Auto”

Remote Management Setup: Status/Operation lets you start/stop the operation and displays the status. Management Port # is the port number used for

VPNThe Virtual Private Network (VPN) screen is for establishing necessary parameters. VPN (PPTP) Setup: VPN Server Status lets you monitor and chang

SPECIFICATIONSStandards• IEEE 802.3 (10Base-T Ethernet)• IEEE 802.3u (100Base-TX Fast Ethernet)• IEEE 802.3x (ow control, for full duplex mode)Gen

INTELLINET NETWORK SOLUTIONS™ offers a complete line of active and passive networking products. Ask your local computer dealer for more information or

TABLE OF CONTENTSHARDWARE ... 5

HARDWAREBefore you begin any installation or setup of the Dual WAN VPN Router, make sure that your computer is equipped with the necessary Web browser

WINDOWS SETUP/INSTALLATIONIt’s recommended that your local network be congured for Internet access through the Dual WAN VPN Router. If this is done a

Windows 20001. Install the router.2. With Windows running, check that the LAN LED on the router is on. If not, check the computer and

5. On the Network and Internet Connections screen, click Network Connections.6. On the Network Connections screen, click Local Area Connection.7. O

Connect On Demand: The Dual WAN VPN Router can automatically connect with the Internet if there is Internet access after disconnection. NOTE: If