Intellinet 4-Port Broadband Router User Manual Page 1

4-PORT BROADBANDROUTER USERMANUAL MODEL 524537 INT-524537-UM-0309-02

10 3 CONFIGURATIONThis 4-Port Broadband Router provides a Web-browser management mode that uses the Web- based user interface presented in this secti

11 3.2 WAN SetupThe 4-Port Broadband Router allows one of four Internet-LAN connection types, which can be selected on this screen: Dynamic IP, PPPo

12 MAC address on the router. It is recommended that you not change the default MAC address unless it’s required by your ISP. MTU — Enter a value

13 Default Physical Address — The default MAC address is set to the WAN’s physical interface MAC address on the router. It is recommended that you n

14 Server IP Address — Enter the PPTP server address provided by your ISP. WAN Connection Type: The two options are “DHCP” or “Static IP.” Select “St

15 DHCP Lease Time — Specify how long (in seconds) an IP address is valid for a computer before a new IP address is issued. Normally, there is no n

16 Apply — Click “Apply,” then “Save” to set and save any changes. 3.5.3 Virtual Server SetupThis screen lets you specify some services to be visible

17 Forward Protocol — Enter the incoming (inbound) port or port range for this type of application (e.g., 2300-2400, 47624). NOTE: Individual port n

18 the Internet (by selecting “Permit” or “Deny” from the drop-down menu. NOTE: Enter the 12-digit MAC address in this format: XX-XX-XX-XX-XX-XX (

19 3.6.3 URL Filtering CongurationThis screen lets you enter keywords specic to the site in these elds. The router will block access to sites that

20 3.8.1 Login ID & Password SetupThe factory-set default password is “guest.” You can change the default password to ensure that someone can’t a

21 3.8.5 WAN Link Status & SetupWAN Link Setup — Select the desired mode from the drop-down menu, which will then dis-play to the right of “WAN L

22 4 SPECIFICATIONSStandards• IEEE 802.3 (10Base-T Ethernet)• IEEE 802.3u (100Base-TX Fast Ethernet)General• LAN ports: 4 RJ45 10/100 Mbps data

INTELLINET NETWORK SOLUTIONS™ offers a complete line of active and passive networking products. Ask your local computer dealer for more information or

3 INTRODUCTIONThank you for purchasing the INTELLINET NETWORK SOLUTIONS™ 4-Port Broadband Router, Model 524537.Combining a router, rewall and four-po

4 TABLE OF CONTENTS 1 Hardware Installation ... 5

5 1 HARDWARE INSTALLATIONUsing the included RJ45 Ethernet cable (and more, as needed), make your 4-Port Broadband Router network connections by follo

6 2 NETWORK SETTINGSBefore you can connect to the router and begin your conguration, you need to be able to obtain an IP address automatically; that

7 5. On the Properties screen, select “Obtain an IP address automatically” and “Obtain DNS server address automatically,” then click “OK” to

8 4. On the Internet Protocol (TCP/IP) Properties screen, select “Obtain an IP address automatically” and “Obtain DNS server address automatic

9 5. On the Internet Protocol Version 4 (TCP/IPv4) Properties screen, select “Obtain an IP address automatically” and “Obtain DNS server address